Modularity

A kit, not a catalogue

Every module is complete on its own and combines with every other – in a row along a pedestrian zone, as a triangle on a square, as a cluster over a courtyard.

Between two modules the net spans as a bridge, between three as a surface. Three in a triangle are the optimum: the smallest arrangement that covers one continuous area without a centre post. There is no upper limit. The vines close the net in the first season.

Plan view: three Stadthain Solo modules in a triangle with a net between them Three square modules of two by two metres stand at the corners of an equilateral triangle with sides of four and a half metres. Above each module is a square canopy. The net is fixed to the outer edges of the three canopies and covers the whole area between them. Axis spacing 4.5 m Module 2 × 2 m Canopy, square Net on the canopy edges PLAN VIEW
Geometry, not measurement: module size and axis spacing are to scale, the canopy is schematic. The net is hooked to the outer edges of the three canopies and so covers the whole area between them. Every further module set against an existing edge spans the next net.

Planner

Build your grove

Every module stands on its own and can be placed freely, in three height steps. The net between three modules is hooked to the outer edges of the canopies – so it covers the largest possible area, and different heights turn it into sloping surfaces instead of a flat plane. Move the modules, set the heights, then let the vines grow.

Schematic view: the module size is to scale; canopy size, height steps and the longest net span are not. The covered area is therefore an indication. The values are in the datasheet; stability and net are calculated for each arrangement individually.

Arrangements

Built in steps

Municipal budgets work in exactly these steps. A grove does not have to be approved in one go: a module can be added every year without replacing the first.

Two in a row

A shaded passage, the net bridging the canopies. Fits along a building edge, a pedestrian zone or between parking spaces – and stays under €50,000 net including delivery and assembly. See the worked example

Three in a triangle

The optimum. The net hangs from the outer edges of the three canopies and spans the whole area between them without a centre post – one continuous roof.

Four and more

Each further module set against an existing edge spans another triangle. Extendable across several budget years.

Geometry

Why three are the optimum

Three points span a surface without needing a fourth, and a net between three suspension points needs no centre post. Four modules in a square need more ground for the same covered centre.

And you can keep building: every module set against an existing edge spans another net. A grove becomes a continuous roof, step by step.

What you should know beforehand

  • One growing season lies between installation and shade. Put up in March, you sit under it in July; put up in September, the following summer.
  • The net is a wind load surface. The stability calculation for a group differs from that for a single module and is done per arrangement.
  • You choose the height of each module in steps when ordering. After installation it can be adjusted within a small range, but not changed freely.
  • The modules stay individually movable. Net off, forklift in, module out – grouping them is not joining them.

Every arrangement is engineered individually

Span, net type and fixing depend on the site, and the wind load proof for a group differs from that for a single module. So we calculate every arrangement instead of selling a standard configuration that does not fit your square.

In the first run we accompany a limited number of sites closely – design, installation and the measurement series over the first seasons. If you want to take part, get in touch early.